quarta-feira, 21 de agosto de 2019

Isotta-Fraschini Tipo 8AS Boattail Cabriolet by Carrozzeria Castagna 1930, Itália































Isotta-Fraschini Tipo 8AS Boattail Cabriolet by Carrozzeria Castagna 1930, Itália
Fotografia


120 bhp, 7,370 cc L-head eight, three-speed manual transmission, solid front axle with semi-floating rear axle and semi-elliptic leaf springs front and rear, and four-wheel Dewandre vacuum servo-assisted mechanical drum brakes. Wheelbase: 146"
• Pebble Beach Second in Class winner
• Ex-Sergio Franchi Collection
• Recent concours quality restoration
The Eight-Cylinder Isotta-Fraschini
Società Milanese Automobili Isotta, Fraschini & C. was founded on January 27, 1900. The firm was focused on the assembly of Renaults before advancing to production of its own namesake automobile. Early production focused on high horsepower cars: veritable fire-breathers that achieved celebrity in the crucible of racing. Of early note is Isotta’s victory in the 1908 Targa Florio. In 1919, the firm established itself as a luxury manufacturer with the introduction of the Tipo, or Type 8, which became the first production car to feature a straight-eight engine. The successor to the 5.9-Liter Tipo 8 was the 8A, which had a 7.3-liter straight-eight that put out a respectful 80 horsepower.
The next step in the development of the larger eight liter was the 120 horsepower Tipo 8AS, with the ‘S’ denoting a tuned engine. The true answer to understanding the 8AS is slightly more involved. According to Angelo Tito Anselmi’s groundbreaking reference on the marque, “Until the spring of 1927, the Spinto or tuned versions of the 8 and 8A were made sporadically and resulted from a combination, optional to a certain degree, of three ingredients: short wheelbase chassis, engine with high compression ratio, and a somewhat high numerical final-drive ratio. The fourth ingredient was lightweight coachwork, which Isotta-Fraschini advised but which was left to the client’s taste.” Chassis length on the 8AS was also negotiable, and many clients preferred the longer 146-inch wheelbase, which allowed for better body lines.
Amici Milanese
Like other luxury marques, the Isotta-Fraschini was offered as a rolling chassis that would be sent off to be clothed with coachwork produced by the finest craftsmen of the day. The length of the massive 8A engine lent itself to a long hood and cowl that became signatures for the model. Carrozzeria Castagna gained serious traction after it began producing automobile bodies in the early-1900s and soon, bodies by Castagna were frequently finding their way onto the most exclusive chassis of the day, including the Alfa Romeo 8C, Mercedes-Benz, and of course, Isotta-Fraschini. The relationship between the two was so successful that it could be said that Castagna was to Isotta-Fraschini what Murphy was to Duesenberg. There were a number of other Italian coachbuilders who collectively provided the majority of the bodies for the various eight-cylinder Isotta chassis, but few are considered more exceptional than the drophead Castagnas.
Chassis 1581: “The Grey Goddess”
Chassis 1581 was acquired sometime in the late-1970s or early 1980s, by world renowned actor and opera tenor Sergio Franchi. A photo of Franchi with the fully intact 8AS Castagna Cabriolet appears as if it had just been woken from a long slumber. By 1983, the car was restored and displayed at Pebble Beach and remained identified with Franchi until being acquired by the current connoisseur nearly two decades later.
Given that the restoration was a quarter century old, the new owner commissioned Byron Libbey, of Libbey Restorations in Shrewsbury, Massachusetts, to enable the car to return to Pebble Beach. The car was running and driving well prior to disassembly, and a set of photographs that document the restoration will be supplied with the car. The chassis, suspension, and undercarriage shield are finished in a deep, even black, which was given as much attention as the exterior sheet metal of any outstanding concours restoration. The engine was lightly torn down, found to be in excellent working order, and cosmetically furnished to proper surface finishes, including the abundance of polished aluminum, as it originally appeared, and the lengthy painted red 7.3-liter block. The steering box, transmission, and rear end were fully rebuilt, and the only modification made was to use a close gear ratio in the steering box, which improved handling.
The coachwork is entirely original and constructed of aluminum, with the sheer size of the fully assembled body and its individual panels belied by exceptional proportioning of its entire sculpted length. The solidity of the body is especially impressive, due to the metal choice, and demonstrates the inherent Italian ability to incorporate sound structural support into some of the most voluptuous forms. Finished in a green-grey similar to the livery it previously wore, a lighter green belt molding is accented by a delicate forest green pinstripe that runs down its length. The long flowing front fenders make an impressively crafted turn so they may conform to and append to the side of the chassis rail and continue rearward. Adoring the front passenger-side fender is a single parking light with a green cut glass lens on the front and a red jewel on the rear, which is mimicked by the cut red glass of the taillight.
Next are dual teardrop-shaped step plates, which double as toolboxes and are accessed via the varnished wood lid, which is adorned with chrome ribs. The teardrop-shaped profiles are also finished with varnished wood and followed by the rear arches, which arc up and over the rear wheels. Mounted on the driver’s side are the three wooden rumble seat step plates trimmed with chrome ribs and framing.
The body continues to the rumble seat lid, which is opened via an internal handle. The absence of exterior hardware minimizes distraction when the lid is lowered, as does the lack of handles on the dual golf bag doors. Following the rear compartment is the boattail, punctuated by two rear-mounted wire spares. Close inspection of the wheel knockoffs shows that they are inscribed with Isotta’s intricate logo, as well as the words sinistro and destroy, to denote the threads as being left- or right-handed. Even the license plate is lit by a lamp of the same quality of that used on the interior, and an artistic chromed exhaust tip fans out three dimensionally in a diamond shape.
All of the chrome on the exterior was re-plated, including the six wire wheels, period accessory Stephen Grebel headlights with stone guards, the Grebel spotlight, bumpers, and the distinctive radiator stone guard, which has an artistic representation of the sun’s rays depicting them as electric lightning bolts with arrow tips on the ends of the rays. The many other excellently plated elements include the window and windshield frames, the Bosch wiper motor, handles, knobs, and other minor fitments and fixtures down to the frame of the Isotta-Fraschini Owner’s Association badge adorning the front bumper.
The exterior of the dark green cloth convertible top is fresh and clean, while its grey upholstered headliner is taught and unblemished. The interior of the very sound convertible top is accented by two oval courtesy lights, which have frosted, etched glass covers. Other features include dual locking glove boxes and intricate wooden inlay, which utilized multiple types of wood and features an artistic usage of grained and burled wood, which is matched by the finish and materials used in the rumble seat, down to the dual locking glove boxes. Highlighting the interior is the engine turned dash, which is fitted with fine instrumentation illuminated by dual lights, and the split windshield frames, which can be folded out for better ventilation. The quality of accoutrement also applies to the delicate dual glass ashtrays with wooden covers and the solid multiple inlay work around the door panel upholstery, which utilizes dark green leather piped with green-grey. Even the tubular door pulls are of quality, made of two-tone interwoven leather strips.
A single front bench seat is actually two independent seats that can be individually adjusted on tracks; behind the driver’s seat is a crank that will adjust the seat back to fine tune the comfort for a driver of most any size. A piano-hinged chrome strip lays on top of the doors when the windows are lowered and glides up when it is raised. This feature completes the crisp look created when the top is down, and the B-pillars have been removed and stowed in the rear compartment. Sitting behind the wheel, one is reminded of the power of the Isotta-Fraschini brand. The whole car is European in every sense of style and presentation, yet in the middle of the steering wheel are the labels that mark the spark and throttle control levers, which are printed in both Italian and English. A dash plaque also indicates that this car was delivered through Isotta Motors Inc. in New York City. Both features remind the viewer that nearly 30% of new cars produced by the Milanese firm were delivered new to the motoring elite in the United States.
Libbey’s three decades of restoration experience paid off with a Second in Class at Pebble Beach in 2009, as well as Best of Show at the Newport Concours d’Elegance. Accompanying this desirable Isotta-Fraschini 8AS are photographs depicting the car prior to and during restoration. The coachwork adorning chassis 1581 is of exceptional beauty and quality of presentation, from its entire overall balance down to the smallest orders of magnitude. Its ‘spinto’ tuned, 120 horsepower 7.3-liter eight, coupled with the other desirable elements that define the 8AS, including the lightweight, open aluminum boattail coachwork by Carrozzeria Castagna, are representative of the pinnacle of Classic Era European styling elegance.


Fonte: https://rmsothebys.com/en/auctions/mo12/monterey/lots/r161-1930-isotta-fraschini-tipo-8as-boattail-cabriolet-by-carrozzeria-castagna/280746

Isotta-Fraschini Tipo 8AS "Commodore" Roadster Cabriolet by Castagna 1928, Itália

















Isotta-Fraschini Tipo 8AS "Commodore" Roadster Cabriolet by Castagna 1928, Itália
Fotografia

120 bhp, 7,370 cc L-head eight, three-speed manual transmission, solid front axle with semi-elliptic leaf springs, semi-floating rear axle with semi-elliptic leaf springs, and four-wheel Dewandre, vacuum, servo-assisted mechanical drum brakes. Wheelbase: 3,708 mm

Founded in 1900, the early production Società Milanese Automobili Isotta, Fraschini & C. focused on high horsepower cars; these were veritable fire-breathers that achieved celebrity in the crucible of racing, with an early highlight being Isotta’s victory in the 1908 Targa Florio. In 1919, the firm established itself as a luxury manufacturer with the introduction of the Tipo 8, which gained notoriety as the first production car to feature a straight-eight engine. The successor to the 5.9-litre Tipo 8 was the 8A, which had a 7.3-litre engine that could produce a respectful 110 horsepower.
The next step in the development of the larger eight litre was the 120 horsepower Tipo 8AS, with the “S” denoting a tuned engine, but to truly understand the difference between the 8A and 8AS is slightly more involved. This is highlighted by Angelo Tito Anselmi’s ground-breaking reference on the marque: “Until the spring of 1927, the Spinto, or tuned, versions of the 8 and 8A were made sporadically and resulted from a combination, optional to a certain degree, of three ingredients: a short wheelbase chassis, an engine with a high compression ratio, and a somewhat high numerical final-drive ratio. The fourth ingredient was lightweight coachwork, which Isotta Fraschini advised, but which was left to the client’s taste”. Chassis length on the 8AS was also negotiable, with many clients preferring the longer 3,708-millimetre wheelbase, which allowed for better body lines.
Chassis 1467 is a long-wheelbase Tipo 8AS with gorgeous roadster cabriolet coachwork by Castagna. The body style was first exhibited at the 1928 New York Auto Salon at the Hotel Commodore. This style was subsequently known as “the Commodore”, and approximately 10 similar examples were constructed, with all of which varying in finish details. This example is one of the six or seven that are known to survive. With massive yet well-balanced proportions, the word “sporting” is an understatement. Highly appealing are the distinctly European, dual rear-mounted spare tyres, as is the stylish 1920s look of the squared-off windshield pillars and rear of the convertible top. This particular Commodore also has a number of bespoke details, like the gorgeous radiator stone guard, which incorporates a stylised “8” over an “A”, lest the observer should forget the model designation.
The known history of chassis 1467 dates back to the 1950s, when it was owned by Mr and Mrs Robert H. Kimes, of Dayton, Ohio, whose company manufactured industrial cutaways for training purposes. The Kimeses owned the Isotta from the early 1950s through the early 1960s, and it is then known to have passed into the hands of pioneering collector Vernon Jarvis, of Silver Springs, Florida; following his passing, it resided in his Early American Museum, also in Silver Springs. The Isotta then travelled to its native Italy, where it resided with collector Aldo Cesaro, before passing into the current ownership in 1994.
The file on the car is wonderful. It includes a copy of a letter written by Robert Kimes to early and highly regarded collector D. Cameron Peck, which mentions the Isotta. Also included are copies of a postcard made by the Early American Museum, which features the Isotta finished in black livery. The car also comes with certification from Automotoclub Storico Italiano and correspondence from Registro Storico Isotta Fraschini, in which it is asserted that chassis 1467 is actually the car that was displayed at the New York Auto Salon at the Hotel Commodore, where it was reportedly painted two-tone green with green and gold lizard-skin upholstery! Although this cannot be confirmed unequivocally, it is very possible that 1467 was the display car, given that it is, by far, the lowest chassis number of any of the surviving Commodore Roadster Cabriolets, and therefore, it was probably the first produced. The letter from Registro Storico asserts that “it is, therefore, a vehicle of particular importance to the heritage of historic Italian automobiles”.
As presented today, chassis 1467 is absolutely stunning in pale yellow with black wings, black beltline moulding, and yellow pinstriping. The interior and exquisite rumble seat are upholstered in green leather, which is complemented by the green-painted wire wheels. Wonderful detail items include the varnished wood mouldings, braided door pulls, the wooden toolboxes mounted in the wings, and the Castagna coachbuilder badge affixed to the centre of the dash. Following its return to Italy, the car was displayed at the Concorso d’Eleganza Villa d’Este and, in 1998, at the Concours d’Elegance of Tigullio in Rapallo.
Stunning and pure, the Commodore is welcome at events in Europe and North America, and it would be at home on either continent.

Fonte: https://rmsothebys.com/en/auctions/LF13/London/lots/r152-1928-isotta-fraschini-tipo-8as-commodore-roadster-cabriolet-by-castagna/294077

Isotta-Fraschini Tipo 8AS, Itália






Isotta-Fraschini Tipo 8AS, Itália
Fotografia

Packard Saoutchik Limo 1931, Estados Unidos






Packard Saoutchik Limo 1931, Estados Unidos
Fotografia

Largo da Sé, 1916, São Paulo, Brasil


Largo da Sé, 1916, São Paulo, Brasil
São Paulo - SP
Fotografia

O Marco Zero e o Touring Clube do Brasil, São Paulo, Brasil





O Marco Zero e o Touring Clube do Brasil, São Paulo, Brasil
São Paulo - SP
Artigo

Quem passa hoje pela Catedral da Sé, de frente para a entrada principal, vê um curioso monumento hexagonal chamado Marco Zero. Apesar de fazer parte do nosso dia a dia, quase ninguém sabe que ele foi inaugurado no dia 18 de setembro de 1934, ou seja, ele tem quase 85 anos de vida.
Segundo o jornal Correio Paulistano, uma das principais fontes de informação da época, “o Marco Zero servirá para assinalar, no coração da urbe paulistana, o ponto único de início das rodovias que se irradiam da capital para os diferentes pontos do Estado”. E o jornal faz um registro histórico muito competente, dizendo que a iniciativa do Marco Zero, no Largo da Catedral, é datada de 1921, quando foi sugerida por Américo R. Netto, um dos diretores da extinta Associação Paulista de Boas Estradas.
O estilo do monumento, hexagonal e com detalhes, também foi sugerido por ele, em um artigo publicado na imprensa de São Paulo, com a colaboração de Jean Gabriel Villin. Entre os anos de 1930 e 1933 o projeto ficou parado, mas o Touring Clube do Brasil, através de sua sede de São Paulo, pediu ajuda ao prefeito Antônio Carlos de Assumpção sugerindo a construção do monumento.
O prefeito aceitou a ideia e deu o projeto na mão de Domício Pacheco e Silva, engenheiro chefe da seção de estradas de rodagem da prefeitura naquela época. O engenheiro, que era um entusiasta da ideia, deu o parecer favorável à ideia e o Marco Zero foi construído em um prisma hexagonal de mármore paulista.
A placa de bronze original do monumento foi uma doação do mesmo Touring Clube do Brasil, onde estavam os itinerários para, partindo dali, pudessem atingir as estradas cujo rumo final se acha indicado pelo nome do estado ou da cidade correspondente.
Assim, a face do Paraná tem um pinheiro e indica o rumo para o sul; para Santos a ideia é o mar e por isso tinha um navio; para o Rio de Janeiro, a bananeira e o Pão de Açúcar; para Minas Gerais os materiais de mineração; para Goiás a bateia e, para o Mato Grosso, atributos dos bandeirantes. Texto do blog São Paulo in foco.


Vista Aérea do Vale do Anhangabaú, São Paulo, Brasil


Vista Aérea do Vale do Anhangabaú, São Paulo, Brasil
São Paulo - SP
Fotografia - Cartão Postal

Rua e Ladeira São João em 1890, 1928 e 1936, Atual Avenida São João, São Paulo, Brasil





Rua e Ladeira São João em 1890, 1928 e 1936, Atual Avenida São João, São Paulo, Brasil
São Paulo - SP
Fotografia


História da Construção da Via Anchieta, Estado de São Paulo, Brasil








História da Construção da Via Anchieta, Estado de São Paulo, Brasil
Estado de São Paulo - SP
Fotografia



Uma das estradas mais importantes de São Paulo, historicamente falando, é a Via Anchieta, inaugurada no dia 22 de abril de 1947. Considerada na época uma das mais modernas estradas do mundo, ela representou uma conquista ímpar, tanto para a cidade de São Paulo que ganhava uma ligação com a cidade de Santos, quanto para o estado, que conseguiu concluir uma obra gigantesca e simbólica.
Apesar de existirem diversas informações pela internet, a fonte mais confiável que encontrei veio do Arquivo Público do Estado, através do Boletim do Departamento Estadual de Informações (DEI), que tinha o título de São Paulo de ontem, de hoje e amanhã. A edição que contém as informações que descreverei abaixo é a de janeiro a maio de 1947.
A construção da Via Anchieta foi iniciada no primeiro governo do famoso Adhemar de Barros no ano de 1939, ou seja, quase 10 anos antes de sua inauguração oficial que, por uma coincidência história, foi feita no aniversário do mesmo Adhemar de Barros.
Um trecho interessante do DEI fica por conta desse que, com certeza, é melhor do que qualquer explicação que eu pudesse dar para falar da importância da rodovia: “…é inegável que ao atual chefe do Executivo paulista se deve a primazia de iniciativa no sentido de substituir a já antiquada “Estrada do Mar” por uma rodovia que atendesse ao enorme transito diário de veículos entre as duas principais cidades do Estada”.
Antes que Adhemar de Barros desse início à construção da Via Anchieta, houve uma tentativa frustrada de construção da rodovia. Através do Decreto nº 7162, de 24 de maio de 1935, o Governo do Estado de São Paulo autorizava a construção de uma nova estrada de rodagem entre a capital e a cidade de Santos e, para tanto, abria concorrência pública para que os interessados pudessem participar do processo e iniciar as obras
Apesar das condições favoráveis, não apareceu nenhuma empresa que obedecesse às condições do edital, fazendo com que a iniciativa ficasse engavetada por mais quatro anos. Coube, portanto, a Adhemar de Barros, no dia 9 de julho de 1939, dar início ao processo construtivo da rodovia.
Entretanto, como é sabido por todos, os anos compreendidos entre 1939 e 1945 foram os terríveis anos da 2ª Guerra Mundial e, como não poderia deixar de ser, o país foi afetado por esse conflito e, consequentemente, as grandes obras que aqui aconteciam.
Os problemas foram de todos os tipos: da falta de insumos básicos, como o combustível (que gerou soluções como o gasogênio), à impossibilidade de importar máquinas, o que atrasou de sobremaneira a obra.
Para se ter uma ideia prática do problema, o DEI faz a seguinte constatação: “Em 1942, os serviços sofreram uma grande redução, por se ter agravado o problema da falta de combustível, chegando mesmo a paralisar completamente, durante vários meses desse ano e de 1943. Os Contratos de empreitada, de terraplenagem por meios mecânicos, tiveram que ser rescindidos e os maquinários retirados por falta de 8 ou 10 tambores mensais de óleo diesel”.
Esse problema só seria resolvido em 1943, quando era possível obter uma pequena cota de gasolina, cerca de 10 – 12 mil litros do combustível, o suficiente para que fosse possível continuar os trabalhos de terraplanagem.
Claro que, apenas a falta de combustível, não foi o suficiente para atrasar a obra em quase 10 anos. Outro problema encontrado foi a questão da terraplanagem manual e a falta de cimento (por incrível que pareça). Essas questões, que atrasaram por quase três anos a obra, só foram resolvidas em 1946, quando os abastecimentos dos combustíveis e de insumos foram normalizados.
Vale um destaque histórico de que, nesse ano de 1946, as obras da Via Anchieta receberam seis tratores que, segundo o documento histórico que estamos usando de referência, “Com isso, pôde a direção das obras traçar um programa avançado de ação, de molde a prever-se para bem breve a conclusão da via”.
Para não deixar o texto muito longo e cheio de informações técnicas, resolvi dividir esse artigo em alguns subtítulos. O primeiro deles, a pavimentação, contou com algumas peculiaridades que merecem destaque.
O boletim do DEI destaca que: “…a pavimentação da pista, que é a garantia de segurança do tráfego e da conservação de uma rodovia, seguiu o método de preparo prévio e compressão da base por meio de fôrmas de ferro, dobras em “L”, com os bordos protegidos por cantoneiras, e do comprimento de 3 metros”, e continua”. O informativo ainda faz um minucioso relato de várias outras peculiaridades da pavimentação da Anchieta, mas são dados mais técnicos da obra e, para os engenheiros de plantão, recomendo a leitura do documento completo.
Claro que as obras feitas para vencer as barreiras naturais, o famoso trecho de Serra, demandou esforço e muita perícia dos engenheiros, trabalhadores e todos os envolvidos no desenvolvimento do projeto.
A maior das chamadas obras de arte construídas para a Anchieta, segundo a publicação, é a ponte sobre a represa do Rio Pequeno, que tem o comprimento de 300 metros. Sua estrutura é constituída de vigas “Gerber”, com 27 metros de vão cada uma, apoiadas sobre tubulões de concreto armado. Aqui vale uma citação do boletim: “A colocação dos tubulões sobre o leito do Rio Pequeno representou um dos serviços mais árduos e perigosos de toda a construção da Via Anchieta. Em número de trinta, pois 10 são os pilares, possui cada um a espessura interna de 15 centímetros e um diâmetro externo de 2 metros e 38 centímetros”.
E prossegue com mais detalhes: “Construídos de concreto, em foras verticais, de madeira no seu interior e metálicas externamente, eram tombados, por meio de um guindaste especial, sobre uma plataforma, à margem da represa”.
Já os túneis, outras obras fundamentais para o deslocamento dos veículos, também mereceram uma atenção especial. Eram cinco túneis na via, sendo três nas pistas ascendentes e dois na via descendente.
O destaque histórico dessas obras fica por conta da assinatura dos contratos para a construção desses dispositivos. No dia 8 de agosto de 1941 foi assinado o contrato, com prazo de 300 dias, para a sua execução. Entretanto, devido aos problemas da obra, o primeiro deles só foi concluído em 1946, o segundo em 1947 e o último já na administração de Adhemar de Barros.
Novamente, com a licença de todos, vou recorrer ao relato oficial do DEI: “A inauguração do trecho já concluído da Via Anchieta deu-se a 22 de abril último, assinalando-a solenidades condizentes com a importância do acontecimento.
Cerca das 10 horas, partiu do Vale do Anhangabaú uma grande comitiva, encabeçada pelo Sr. Adhemar de Barros, Governador do Estado; sr. Jeronimo Coimbra Bueno, governador de Goiás, secretários de estado e outras altas autoridades.
Meia hora após, a comitiva chegava ao arco situado na entrada da estrada velha, o qual se achava ornamentado e ostentava um retrato do governador de São Paulo, que iniciou e terminou o maior empreendimento rodoviário nacional. Cortada a fita inaugural pelo chefe do executivo goiano, os dois governadores percorreram, a seguir, um pequeno trecho da estrada, precedidos por um frade capuchinho, que ia espargindo água benta sobre o leito da estrada”.
O relato acima, representa só uma parte das solenidades feitas na inauguração da Anchieta. Várias outras festividades foram feitas durante a descida da serra, como o corte de outra fita inaugural (feita por um dos operários da Anchieta), o aparecimento de outras autoridades e, por fim, para encerrar, uma grande festa comemorativa no litoral.

Obras na Praça Princesa Isabel, 1960, São Paulo, Brasil


Obras na Praça Princesa Isabel, São Paulo, Brasil
São Paulo - SP
Fotografia

Obras para instalação da homenagem ao Duque de Caxias, patrono do Exército. Ao fundo, a Rua Helvétia, bairro dos Campos Elíseos. Na barriga do cavalo do colossal monumento seria possível acomodar 6 pessoas.

Se cogitou que o monumento deveria ser colocado no Largo do Paissandu — sobraria para a Igreja Nossa Senhora do Rosário dos Homens Pretos que pela 2ª vez na história paulistana teria que procurar outro endereço. 
A imagem, focalizada durante a gestão de Adhemar de Barros, foi registrada em 10/3/1960.